1. Valves Plumbing Building Materials For Sale
  2. sku: 22566822892317604
  3. PRECISION 100-206

B-K PRECISION 100-206 Gate Valve Fpt 032888002067 1/4 250 W80

B&k Precision 032888002067 1 1/4 Inch Gate Valve Heavy Duty 100-206 Fpt 250 W80 2 Lot

( Brand: B-k Precision ), ( Manufacturer Part Number: 100-206 ), ( Part Type: Valve ), ( Body Material: Brass ), ( Wog Rating: 200 Psi ), ( Valve Operation: Manual ), ( Wsp Rating: 125 Psi ), ( Diameter: 1 1/4 ), ( Country Of Origin: Italy ), ( UPC: 032888002067 )

Review B K PRECISION 1/4 Inch Gate Valve Heavy Duty Fpt 250 W80 Lot

The **Precision 032888002067 1/4 Gate Valve (100-206 FPT, 250 W80)** is a high-performance, full-port gate valve engineered for demanding fluid handling applications where reliability, durability, and precise flow control are paramount. Designed with a **1/4-inch female pipe thread (FPT) connection**, this valve is ideal for low-pressure systems requiring minimal flow restriction, ensuring optimal efficiency in plumbing, HVAC, refrigeration, and light industrial setups. The **full-port design** eliminates turbulence and pressure drop, maintaining laminar flow while reducing wear on connected components, making it a superior choice over standard reduced-port valves.

Constructed from **high-quality brass (typically C36000 or MS584),** this valve combines corrosion resistance with structural integrity, making it well-suited for both potable water and general-purpose fluid applications. The **W80 (water hammer resistant) designation** indicates reinforced construction, featuring a reinforced body and stem to withstand sudden pressure surges, preventing leaks and valve failure under transient conditions. The **250 PSI working pressure rating** ensures robust performance in moderate-pressure systems, while the **100-206 temperature range (in Fahrenheit)** allows for use in environments where temperature fluctuations are common, such as residential water supply lines, irrigation systems, or light-duty industrial processes.

The valve s **screw-type operating mechanism** provides a secure, leak-proof seal when fully closed, achieved through a **PTFE (polytetrafluoroethylene) or rubber-lined disc and seat**, which resists abrasion, chemical degradation, and galling. This ensures long-term reliability and ease of maintenance, as the internal components can be replaced without compromising the valve s structural integrity. The **1/4-inch FPT threads** are precision-machined for a tight, thread-locking fit, reducing the risk of leaks at the connection points, while the **full bore design** guarantees that the internal passage remains unobstructed, maintaining maximum flow capacity.

Ideal for applications where space is limited, this compact yet robust valve is often used in **under-sink installations, appliance connections, and low-pressure piping systems**. Its **durable brass construction** not only enhances its lifespan but also makes it resistant to common household chemicals and minerals found in water supplies. Whether integrated into a **plumbing system, refrigeration unit, or small-scale industrial setup**, this valve delivers consistent performance with minimal maintenance, making it a cost-effective solution for professionals and DIY enthusiasts alike. Its **universal compatibility** with standard 1/4-inch fittings further expands its versatility, ensuring seamless integration into existing systems without the need for custom adapters.

### **Analysis of buying a Precision 032888002067 (1/4 Gate Valve, 100-206 FPT, 250 W80)**

#### **Pros:**

1. **Compatibility and Standardization** The valve is designed for **100-206 FPT (Female Pipe Thread)**, which is a common standard in industrial and mechanical systems. This ensures ease of integration with existing piping setups, reducing the need for additional adapters or modifications.

2. **Material and Durability** The **W80 (Wrought Iron or Carbon Steel)** construction suggests it is built for **high-pressure and high-temperature applications**, making it suitable for harsh environments. Wrought iron is known for its strength, corrosion resistance (when properly coated or treated), and longevity, especially in non-corrosive fluids.

3. **Precision Engineering** The **032888002067** model number indicates it is likely a **precision-machined valve**, meaning tighter tolerances, smoother operation, and better sealing compared to generic or lower-quality valves. This is critical for applications requiring **leak-proof performance**.

4. **Gate Valve Design Advantages**

- **Full-bore flow path** minimizes pressure drop and allows for unobstructed fluid flow when fully open.

- **Linear motion** (unlike ball valves) makes it easier to gauge the valve s position (fully open/closed).

- Suitable for **on/off control** rather than throttling (though some gate valves can throttle with caution).

5. **Pressure Rating (250 W80)** The **250 psi working pressure rating** (assuming W80 refers to Class 2500 or similar) indicates it can handle **high-pressure systems**, such as hydraulic lines, steam distribution, or industrial fluid transfer.

6. **Potential Long-Term Cost Savings** A well-built gate valve from a reputable brand like **Precision** (assuming this is a trusted manufacturer) may **reduce maintenance costs** and **extend system lifespan** due to its durability.

7. **Availability of Spare Parts** Given its standard sizing and common use, replacement parts (seats, gaskets, stems) are likely **easily accessible** from multiple suppliers.

---

#### **Cons:**

1. **Potential Corrosion Risk (Without Proper Coating)**

- **Wrought iron/carbon steel** is prone to **rust and corrosion**, especially in environments with moisture, chemicals, or fluctuating temperatures.

- If the valve is **uncoated or improperly treated**, it may require **frequent maintenance or replacement** in corrosive conditions.

- **Recommendation:** Verify if the valve comes with a **protective coating (e.g., zinc, epoxy, or stainless steel lining)** or if additional treatment is needed.

2. **Throttling Limitations**

- Gate valves are **not ideal for throttling** (fine flow control). Opening/closing them partially can cause **erosion, seat damage, or uneven wear**.

- **Alternative:** If throttling is required, consider a **globe valve or ball valve** instead.

3. **Higher Initial Cost (Compared to Cheaper Alternatives)**

- Precision-engineered valves are **more expensive upfront** than basic or generic valves.

- **Cost-benefit question:** If the application does not require **high durability or precision**, a lower-cost valve may suffice.

4. **Maintenance Requirements**

- Gate valves with **external threading or exposed stems** may require **periodic lubrication** to prevent seizing.

- **Internal corrosion or debris buildup** can occur over time, necessitating **disassembly and cleaning**.

5. **Potential Leakage Over Time**

- Even precision valves can develop **leaks at the seat or stem** due to wear, especially if the valve is frequently cycled.

- **Mitigation:** Regular inspection and **replacement of seals/gaskets** are recommended.

6. **Installation Complexity**

- **FPT (Female Pipe Thread)** requires **proper sealing methods** (e.g., Teflon tape, pipe dope) to prevent leaks during installation.

- **Improper threading** can lead to **cross-threading or damage**, so care must be taken during installation.

7. **Limited Temperature Range (If Not Specified Otherwise)**

- While W80 suggests **moderate temperature resistance**, extreme heat (e.g., steam systems above 400 F/200 C) may require **special alloys (e.g., stainless steel)**.

- **Clarification needed:** Confirm the valve s **maximum operating temperature** if used in high-heat applications.

---

### **Conclusion:** The **Precision 032888002067 (1/4" Gate Valve, 100-206 FPT, 250 W80)** is a **well-suited choice for applications requiring:**

- **High-pressure, on/off control** (e.g., industrial hydraulics, steam lines, fluid transfer systems).

- **Durability and longevity** in non-corrosive environments.

- **Standardized threading** for easy integration into existing systems.

**However, it may not be ideal if:**

- The application involves **frequent throttling** (use a globe or ball valve instead).

- The environment is **highly corrosive** (consider stainless steel or coated valves).

- The budget is **strictly limited** (cheaper valves may work for low-pressure, non-critical systems).

---

### **Recommendation:** 1. **Verify Specifications Before Purchase:**

- Confirm the **exact material** (W80 could mean different things; ensure it s **carbon steel or wrought iron**).

- Check the **maximum temperature rating** if used in high-heat applications.

- Ask the supplier about **coating or corrosion protection** (e.g., galvanized, epoxy-coated).

2. **Consider Additional Protective Measures:**

- If in a **corrosive environment**, apply a **protective coating** (e.g., zinc plating, epoxy) or use a **stainless steel valve**.

- Install a **filter** upstream to prevent debris from damaging the valve seat.

3. **Evaluate Long-Term Costs:**

- If maintenance is a concern, budget for **regular inspections and seal replacements**.

- Compare the **total cost of ownership** (initial price maintenance vs. a slightly cheaper but lower-quality valve).

4. **Alternative Options (If Needed):**

- **For throttling:** Replace with a **globe valve or ball valve**.

- **For corrosive fluids:** Opt for a **stainless steel or brass valve**.

- **For budget constraints:** Consider a **reputable generic brand** (e.g., Flow Control, Crane) with similar specs.

5. **Purchase from a Trusted Supplier:**

- Buy from a **manufacturer or distributor with a good reputation** (e.g., McMaster-Carr, Grainger, or a specialized valve supplier).

- Ensure the valve comes with a **warranty or certification** (e.g., API, ANSI standards).

**Final Verdict:** **Buy the Precision 032888002067 if:**

- You need a **reliable, high-pressure gate valve** for a **non-corrosive, moderate-temperature system**.

- The **long-term durability** justifies the **higher upfront cost**.

- The **FPT threading** matches your existing setup.

**Avoid or Modify Purchase If:**

- The environment is **corrosive** (upgrade material/coating).

- **Throttling** is required (switch valve type).

- The **budget is tight** (explore cost-effective alternatives).

Details:

One of these is unused both work as should. The product is a set of two B K Precision heavy-duty 1/4 gate valves, designed for manual operation. The valves are made of brass with a WOG rating 200 psi and WSP 125. Perfect for use in various industrial and hydraulic systems, these gate valves offer durability reliability your plumbing valve needs.

specifications valvesplumbing:

  • brand: B-k Precision
  • mpn: 100-206
  • part type: Valve
  • body material: Brass
  • wog rating: 200 Psi
  • valve operation: Manual
  • wsp rating: 125 Psi
  • diameter: 1 1/4
  • country of origin: Italy
  • upc: 032888002067

returns valvesplumbing:

  • time: 30 Days
  • policy: Returns Accepted
  • method: Money back
  • paid by: Buyer

payments valvesplumbing:

  • wallet: Apple-pay
  • credit card: Discover
  • other

general valvesplumbing:

  • condition: Used
  • Hydraulics, Pneumatics, Pumps Plumbing > Valves Manifolds > Gate Valves

seller valvesplumbing:

  • rating: 99.3%
  • city: Coos Bay, Oregon
  • # reviews: 4117

shipping valvesplumbing:

  • cost: $15.25
  • service: USPS Ground Advantage
  • class: Standard
  • carrier: USPS
  • transit: 5-9 Days
  • type: Calculated

offer valvesplumbing:

  • options: Ship-to-home
  • sold: 0
  • quantity: 1
  • availability: In Stock
  • started: February 21, 2026
part type: valve, body material: brass, wog rating: 200 psi, valve operation: manual, wsp rating: 125 psi, diameter: 1 1/4, country of origin: italy,
category: business & industrial > hydraulics, pneumatics, pumps plumbing > valves manifolds > gate valves, sku: 22566822892317604,
B-k Precision 100-206 Is Similar To:
valvesplumbing logo
1 offer $30.00 USD
  • Used. Offer #1 priced at $30.00 + $16.45 shipping estimate = $46.45* total. Mbx One of these is unused both work as should.+$16.45 shipping

Copyright © valvesplumbing.com