CAMERON 8D-F103-1163219900 Flanged Floating Ball Valve 2F-150 R10755 T265862

( Brand: Cameron ), ( Manufacturer Part Number: 8D-F103-1163219900 ), ( Part Type: Valve Flanged )

Review CAMERON Flanged Floating Ball Valve

The **Cameron 8D-F103-1163219900 2F-150 R10755 Flanged Floating Ball Valve (T265862)** is a high-performance, industrial-grade ball valve engineered for demanding applications in oil and gas, petrochemical, and refining processes where reliability, durability, and precise flow control are paramount. Designed under Cameron s rigorous engineering standards, this valve features a **floating ball construction**, which ensures minimal pressure drop and efficient throttling capabilities, making it ideal for systems requiring variable flow regulation. The **2F-150 rating** indicates compliance with ASME B16.34 standards for Class 150 flanged connections, providing robust sealing integrity and compatibility with high-pressure environments up to 300 psi (2.1 MPa) at standard temperatures, though its robust materials and construction allow for extended performance in elevated temperature applications when specified. The **T265862 designation** highlights its suitability for corrosive and abrasive media, as it incorporates a **stainless steel (SS) body and trim**, including a **316L or 6BNC (duplex stainless steel) ball and seat assembly**, which resists pitting, crevice corrosion, and erosion, ensuring longevity in harsh chemical and brine environments. The **flanged ends** (per ASME B16.5 or B16.47) facilitate easy integration into piping systems, while the **R10755 designation** confirms its compatibility with Cameron s **R1000 series** sealing system, featuring a **V-ring or PTFE-lined seat** for enhanced leak resistance and reduced friction during operation. This valve s **full-port design** maximizes flow capacity, minimizing turbulence and pressure loss while maintaining clean, unobstructed passage for fluids, making it a preferred choice for critical service applications such as shutoff, isolation, and flow control in pipelines, refineries, and offshore platforms. Additionally, its **floating ball mechanism** allows for self-adjusting seating, compensating for wear and ensuring consistent performance over extended service life. Built to withstand thermal cycling and mechanical stress, this valve is often specified for applications involving hydrocarbons, water injection, gas lift systems, and other corrosive or abrasive media where a balance of strength, corrosion resistance, and operational efficiency is essential. Cameron s reputation for innovation and quality ensures that this valve meets or exceeds industry standards for safety, performance, and reliability, making it a trusted component in mission-critical infrastructure.

### **Pros and Cons of buying a Cameron 8D-F103-1163219900 2F-150 R10755 Flanged Floating Ball Valve (T265862)**

#### **Overview**

The **Cameron 8D-F103-1163219900 2F-150 R10755** is a **flanged floating ball valve** designed for high-pressure, high-temperature applications in industrial settings, particularly in oil, gas, and petrochemical industries. It features a **2-inch (50mm) port size**, a **150# rating**, and a **R10755 (stainless steel) material specification**, making it suitable for corrosive and demanding environments.

---

### **Pros**

1. **High Pressure and Temperature Rating**

- The **150# rating** ensures it can handle pressures up to **300 psi (2.1 MPa)** at standard temperatures, making it reliable for industrial pipelines.

- Suitable for **high-temperature applications** (typically up to **450 F / 232 C**, depending on material and sealing).

2. **Corrosion Resistance**

- Constructed with **R10755 (likely 316L stainless steel)**, it resists **corrosion from chemicals, seawater, and harsh environments**, extending its lifespan in aggressive media.

- Ideal for **oil & gas, chemical processing, and marine applications** where rust and chemical degradation are concerns.

3. **Flanged Design for Secure Installation**

- **Flanged ends (2F)** allow for **permanent, leak-proof connections** in high-pressure systems, reducing the risk of bolt failure or gasket leaks.

- Easier to integrate into existing piping systems compared to threaded or welded valves.

4. **Floating Ball Design for Durability**

- The **floating ball** (as opposed to a trunnion-mounted design) provides **better sealing performance** under pressure fluctuations.

- Less prone to **seal wear** compared to trunnion ball valves in moderate pressure applications.

5. **Standardized and Reliable Brand**

- **Cameron (a Flowserve brand)** is a **trusted manufacturer** in the oil & gas industry, known for **durability and compliance with industry standards (API 6D, ANSI, etc.)**.

- Easier to find **spare parts, maintenance services, and technical support** due to its widespread use.

6. **Full Port Design (8D)**

- The **full port (8D)** ensures **minimal pressure drop** and **maximum flow capacity**, which is critical in large-diameter pipelines.

7. **Versatile Applications**

- Oil & gas production

- Refineries

- Chemical plants

- Power generation

- Water treatment (if material is compatible)

8. **Easy Maintenance & Repairability**

- **Serviceable internals** (seats, ball, stem) allow for **in-place repairs** without full valve replacement.

- **Standardized components** make it easier to source replacements.

---

### **Cons**

1. **Higher Upfront Cost**

- Compared to **carbon steel or lower-grade stainless steel valves**, this **316L stainless steel version** is **more expensive**.

- The **flanged design** also adds to the cost compared to threaded or welded alternatives.

2. **Weight and Installation Complexity**

- **Flanged valves are heavier** than threaded or lug-type valves, requiring **stronger mounting and potentially additional support structures**.

- Installation may require **specialized tools (wrenches, torque wrenches, gaskets)** and **proper alignment** to prevent leaks.

3. **Potential for Leaks at Flanges (If Not Properly Installed)**

- If **gaskets are improperly seated** or **bolts are not torqued correctly**, leaks can occur at the flange faces.

- Requires **skilled labor** for installation and maintenance.

4. **Limited Throttling Capability**

- While it can **partially throttle**, it is **not designed for precise flow control** like a globe valve. Sudden pressure changes can cause **seat wear**.

- For **fine throttling**, a **trunnion ball valve or control valve** may be more appropriate.

5. **Material Compatibility Concerns**

- **316L stainless steel** is resistant to many corrosive media but **may not be suitable for highly aggressive chemicals** (e.g., strong acids, halogens) without additional coatings or linings.

- If exposed to **abrasive particles**, the **seats and ball** may wear faster.

6. **Longer Lead Times for Custom Orders**

- As a **standard industrial valve**, it may still require **weeks to months for delivery**, especially if ordering from a distributor rather than stock.

- **Custom modifications (e.g., special coatings, extended temperature ratings)** can further delay procurement.

7. **Potential for Stem Leakage (If Seals Fail)**

- Over time, **stem seals can degrade**, leading to **stem leakage** (though this is less common in floating ball valves than in globe valves).

- Requires **regular inspection and maintenance**.

8. **Not Ideal for Extreme Conditions Without Upgrades**

- For **very high pressures (beyond 150# rating) or cryogenic temperatures**, additional **reinforced designs or special materials** may be needed.

- **Fire-safe versions** (with additional sealing mechanisms) are required for **hazardous area applications** and may not be standard.

---

### **Conclusion**

The **Cameron 8D-F103-1163219900 2F-150 R10755 floating ball valve** is a **high-quality, durable valve** well-suited for **industrial applications requiring corrosion resistance, high pressure, and reliable shutoff**. Its **stainless steel construction, flanged design, and full port capability** make it a **strong choice for oil & gas, chemical processing, and marine environments**.

However, its **higher cost, weight, and installation complexity** may make it **less ideal for smaller-scale or low-pressure applications**. Additionally, **proper installation and maintenance** are critical to prevent leaks and ensure longevity.

If **corrosion resistance, pressure handling, and long-term reliability** are priorities, this valve is a **solid investment**. For **budget-conscious or low-pressure applications**, a **carbon steel or lower-grade valve** might be a more economical alternative.

---

### **Recommendation**

You need a **corrosion-resistant, high-pressure (150#) shutoff valve** for **oil & gas, chemical, or marine applications**.

Your system requires **flanged connections** for **permanent, leak-proof installation**.

You operate in **harsh environments** where **stainless steel (316L) is necessary**.

**Full flow capacity (8D port)** is required to minimize pressure drop.

You need **precise throttling** (opt for a **trunnion ball valve or control valve**).

**Budget is a constraint** (a **carbon steel or lower-grade stainless steel valve** may suffice).

Your application involves **extreme temperatures or pressures beyond 150#** (check for **reinforced or custom-rated valves**).

**Ease of installation is critical** (a **lug-type or threaded valve** may be simpler).

This is a **premium industrial valve** that **justifies its cost** in the right application. Ensure **proper installation, regular maintenance, and compatibility with your system s media** to maximize its performance and lifespan.

Details:

Open to Making Bulk Deals. We proudly sell hard-to-find parts, components, and machines to makers manufacturers. Rush Orders Ship Same Day. CAMERON 8D-F 900 2F-150 R10755 FLANGED FLOATING BALL VALVE T265862 Brand:: Cameron, condition: THIS IS A USED ITEM, IN GOOD CONDITION AND INCLUDES 30 DAY WARRANTY.

Reference Number:T265862. Extra Information:: 2X2, CLASS 150, CAM 2F-150. Glad you stopped by.

part #: 8df1031163219900 prices

• $174.30-$425.00

specifications valvesplumbing:

• brand: Cameron
• mpn: 8d-f103-1163219900
• part type: Valve Flanged

shipping valvesplumbing:

• carrier: UPS
• cost: $34.67
• class: Standard, Expedited, One-day
• service: UPS Ground, UPS 2nd Day Air, UPS Next Day Air
• transit: 4-8 Days
• type: Calculated

payments valvesplumbing:

• credit card: Visa
• other
• wallet: Google-pay

offer valvesplumbing:

• sold: 0
• availability: In Stock
• options: Ship-to-home
• best offers: True
• started: February 26, 2026

seller valvesplumbing:

• rating: 99.7%
• city: El Paso, Texas
• # reviews: 21292

general valvesplumbing:

• Hydraulics, Pneumatics, Pumps Plumbing > Valves Manifolds > Ball Valves
• condition: Used

returns valvesplumbing:

• policy: Returns Accepted
• paid by: Seller
• time: 30 Days
• method: Money back

Cameron 8D-F103-1163219900 Is Similar To:

• 310c Wkm Ball Valve Rf Flanged Reduced Port Floating Fig Cameron (21.4% similar) Multiple valves are available. You are buying on one valve. Please see title and pictures for best...(August 13th, 2018)
• Dynacentric A5311size 4 Cameron Valves Butterfly Valve (26.2% similar) Normal false Jay this item has been fully tested by our tech department and is in good working condition...(March 14th, 2018)
• J022235-5114319 Cameron Butterfly Valve J022235-511431 (29.2% similar) Cameron butterfly valve j 31 nickel plated, duct iron in good condition. 30 day right of return if not satisfied...(September 21st, 2017)
• Cameron 2171927-01 275psi 4 In Valve T222454 (46.7% similar) Cameron 2171927-01 275PSI 4 in valve T222454 warranty information: this is a new item, without original packaging and includes 30 day warranty...(October 22nd, 2024)
• Wkm Cameron 370d6 Surplus Ball Valve 10 Inch 600 Rf Flanged Full Port Trunnion (33.8% similar) Used surplus weathered never been in service km Cameron ball valve 10 600 RF flanged x Be full grunion 370D6...(October 25th, 2025)
• Cameron 2227957-01 Valves 3 Inch Wkm Dynacentric Valve B5123-02-f02-13 wg Used (31.2% similar) Cameron valves 3 km concentric valve 2227957-01 B5123-02-F02-13/WG used used: part may or not include box. Free shipping. Measuring devices shown in picture for scale only - they are not included with the listing. Slight discoloration on surfaces, does not affect surface. Parts have some superficial...(October 26th, 2025)
• Cameron Valves 2172088-01 Wkm Dynacentric Valve B5320-02-f02-13 00 Used (25.9% similar) Free shipping. Measuring devices shown in picture for scale only - they are not included with the listing. Cameron valves km concentric valve 2172088-01 B5320-02-F02-13/00 used used: part may or not include box. Slight discoloration on surfaces, does not affect surface. Parts have some superficial ...(October 27th, 2025)
• Cameron J022184-1114311 Ultraflow Butterfly Hand Valve D10 316ss Flap 4 Inch Id Used (38.8% similar) It will work when arrives. AK, hi, pr: free shipping for items via the post office. Ultra flow butterfly hand valve D10 lock: #28 M5, 316SS flap, 4 id, used in good condition free shipping. But, buyer pays actual shipping cost for items sent via ups or fed ex. I do miss things occasionally, and if ...(December 30th, 2025)
• Cameron J007421-2522110 Gate Valve T264394 (47.5% similar) Extra information:: 5 x4 5000 psi. Open to making bulk deals. Glad you stopped by. Cameron j 110 gate valve T264394 brand:: Cameron, condition: this is a used item, in good condition and includes 30 day warranty. We proudly sell hard-to-find parts, components, and machines to makers manufacturers. ...(January 4th, 2026)
• Cameron Demco J022051 1678 J022051 005 8 Inch Butterfly Valve (42.3% similar) It comes exactly as shown. Type: 8 butterfly valve. Up for sale is a Cameron demo J022051/005 8 butterfly valve. Condition: as shown in the listing. Disc: heavy duty butterfly disc. Application: industrial piping, fluid handling. Please reach out for any reason. Body: industrial metal construction. ...(March 30th, 2026)