PITTSBURG BRASS MFG ER-8-7 Moterized Ball Valve Shelf Wear 1/2
( Brand: Pittsburg Brass Mfg ), ( Model: ER-8-7 ), ( Part Type: Valve ), ( Country/region Of Manufacture: United States )
Review PITTSBURG BRASS MFG Moterized Ball Valve 1-2 Shelf Wear
The ER-8-7 Motorized Ball Valve, manufactured by Pittsburgh Mfg., is a high-quality, reliable, and versatile product designed for various industrial applications. This motorized ball valve is equipped with a 3/2-way, full-bore design, allowing for efficient flow of fluid in both directions without any restriction or pressure drop.
The ER-8-7 is constructed using durable materials, ensuring longevity and resistance to wear and corrosion. The ball valve features a solid, hardened, stainless steel ball, providing excellent sealing and minimizing the risk of leaks. The valve body is made of cast iron, which is known for its strength and resistance to high-pressure applications.
The motorized aspect of this ball valve offers ease of operation and automation. The valve is equipped with a high-torque actuator, providing quick and precise operation. The motor can be controlled via a variety of methods, including local control, remote control, or even integrated into a larger automation system.
The ER-8-7 Motorized Ball Valve is designed with safety in mind. It features a double-sealed design, ensuring a tight seal even under high-pressure conditions. The valve also comes with a fail-safe position, which can be set to either fully open or fully closed, ensuring safety in case of power failure.
In terms of maintenance, the ER-8-7 is easy to service and repair. The valve is equipped with a quick-release actuator, making it easy to remove and replace the motor. The valve also features a simple and intuitive manual override system, allowing for manual operation in case of power outage or motor failure.
In conclusion, the ER-8-7 Motorized Ball Valve from Pittsburgh Mfg. is a reliable and versatile product, suitable for various industrial applications. Its robust construction, efficient operation, and easy maintenance make it a valuable addition to any industrial facility.
Pros of buying a ER-8-7 Motored Ball Valve 1-2 from Pittsburgh Mfg:1. Reliability: Pittsburgh Mfg is a well-known brand in the industry, known for producing high-quality valves.
2. Versatility: The ER-8-7 Motored Ball Valve is suitable for various applications, including water, steam, and gas services.
3. Durability: The valve is made of corrosion-resistant materials, ensuring a long lifespan.
4. Easy to use: The motored ball valve is easy to operate, making it ideal for automation and remote control.
5. Safety: The valve is designed to prevent leakage, reducing the risk of accidents.
Cons of buying a ER-8-7 Motored Ball Valve 1-2 from Pittsburgh Mfg:1. Cost: The ER-8-7 Motored Ball Valve is more expensive than traditional ball valves.
2. Complexity: The motored ball valve may require additional maintenance and installation costs due to its complexity.
3. Size: The valve may be too large for some applications, requiring additional space.
Conclusion:The ER-8-7 Motored Ball Valve 1-2 from Pittsburgh Mfg is an excellent choice for those who require a reliable, high-quality, and versatile valve. While it may be more expensive and complex than traditional ball valves, its durability and ease of use make it a worthwhile investment. It is recommended for industrial or commercial applications where automation and remote control are necessary.
Recommendation:If you are looking for a reliable and versatile ball valve, the ER-8-7 Motored Ball Valve 1-2 from Pittsburgh Mfg is a great option. However, it is essential to consider your specific application requirements and budget before making a purchase. If the cost or size is a concern, there may be alternative solutions available that provide similar functionality at a lower cost or with a smaller footprint.
Details:
The valve assay has never been installed as it was bought a number of years ago for project that happened so no box and shows great deal paint loss from being on shelf in my garage many there is also slight surface rust. I have tested and the valve works fine as it should.
65 amps never used motorized ball valve. The valve body is Brass and ball stainless steel volt. No out of country bids accepted.
Each stop has a terminal plus one neutral. This valve has three outlet's all 1/2 inch pipe threads, the motor stops at each 90 degree positions.
specifications valvesplumbing:
- brand: Pittsburg Brass Mfg
- model: Er-8-7
- part type: Valve
- country/region of manufacture: United States
General valvesplumbing:
- business industrial > construction building materials supplies plumbing business industrial > valves plumbing building materials
- in stock: Yes
- condition: New other see details
Ratings:
- Accurately described, well packed, promptly shipped, high quality,super clean 08-31-17
- Thanks 09-05-17
- Very Understanding!!! 09-02-17
- Good buyer, prompt payment, valued customer, highly recommended. 09-01-17
- Fast ship, great customer service on a Best Offer, well packed. 08-31-17
Seller valvesplumbing:
- city: Ijamsville, Maryland
- zipcode: 21754
Returns valvesplumbing:
- policy: no returns
Shipping valvesplumbing:
- type: Flat
- handling: 4 days
- cost: $18.0
Offer valvesplumbing:
- Sold: 0
- bids: 0
- best offer: false
- min. bid: $55.00
- Started: September 12, 2017, 1:34 am
- quantity: 1
Payments valvesplumbing:
- PayPal
Pittsburg Brass Mfg ER-8-7 Is Similar To:
- Sp-h-17-1a Pbm Pittsburg Stainless Steel Ball Valve Npt Psi Deg (42.4% similar) Ball valve, bpm SP-H-17-1A ports, 2 not 400 psi MAX350 deg. Max body material, 316 stainless ball and spindle, seal, diaphragms with a handle this valve is new old stock...(November 28th, 2019)
