1. Valves Plumbing Building Materials For Sale
  2. sku: 22820730592129771
  3. REXROTH MHD095C-058-PG1-AN

REXROTH MHD095C-058-PG1-AN Servo Motor

Mhd095c-058-pg1-an Rexroth Servo Motor M

( Brand: Rexroth ), ( Manufacturer Part Number: MHD095C-058-PG1-AN ), ( Part Type: Servo Motor )

Review REXROTH Servo Motor

The **Bosch Rexroth MHD095C-058-PG1-AN** is a high-performance, brushless servo motor designed for precision industrial automation, offering exceptional reliability, efficiency, and dynamic response in demanding applications. Part of Rexroth s advanced MHD (Modular Hydraulic Drive) series, this servo motor integrates seamlessly with hydraulic systems, delivering superior torque density, compact footprint, and robust construction for continuous operation in harsh environments. With a nominal diameter of **95 mm**, this motor combines cutting-edge permanent magnet technology with a high-efficiency, rare-earth magnet rotor, ensuring minimal energy loss and maximum power output even under heavy loads. The **058** designation indicates a torque rating optimized for applications requiring precise control, such as CNC machining, robotics, or automated material handling, where smooth acceleration, deceleration, and positional accuracy are critical.

The **PG1** interface standardizes the motor s connection to Rexroth s hydraulic systems, enabling easy integration with proportional valves, pumps, and controllers, while the **AN** suffix denotes a specific variant tailored for applications requiring high-speed responsiveness and low inertia. Built with a **closed-loop feedback system**, this servo motor achieves sub-millimeter positioning accuracy, making it ideal for tasks demanding repeatability and consistency, such as in packaging, textile, or automotive assembly lines. Its **IP65 protection rating** ensures resistance to dust, water splashes, and contaminants, while the **wide operating temperature range** (-20 C to 85 C) allows for deployment in both indoor and outdoor industrial settings without performance degradation.

Rexroth s proprietary **vector control algorithm** enhances the motor s efficiency by dynamically adjusting current and torque based on real-time load conditions, reducing heat generation and extending component lifespan. The motor s **smooth, vibration-free operation** is further supported by a **low-noise design**, making it suitable for applications where acoustic considerations are important. Additionally, the **modular design** allows for easy maintenance and upgrades, with components such as bearings, seals, and sensors accessible without disassembling the entire unit. Whether used in high-speed indexing, precise linear motion, or torque-controlled applications, the **MHD095C-058-PG1-AN** delivers a perfect balance of power, precision, and durability, reinforcing Bosch Rexroth s reputation for engineering solutions that drive industrial automation forward.

### **Pros and Cons of buying a Rexroth MHD095C-058-PG1-AN Servo Motor**

#### **Pros**

1. **High Performance and Precision**

The Rexroth MHD095C series is designed for high-speed, high-torque applications, making it suitable for demanding industrial automation tasks such as CNC machining, robotics, and packaging systems. Its advanced control capabilities ensure smooth acceleration, deceleration, and positioning accuracy.

2. **Reliability and Durability**

Bosch Rexroth is a well-established brand in industrial automation, known for producing robust, long-lasting components. The MHD095C is built with high-quality materials and precise engineering, reducing the risk of frequent failures and downtime.

3. **Compatibility with Rexroth Control Systems**

This servo motor is designed to integrate seamlessly with Rexroth s IndraDrive and IndraMotion control platforms. This compatibility simplifies programming, tuning, and maintenance, as users can leverage Rexroth s ecosystem of drives, controllers, and software tools.

4. **Energy Efficiency**

The motor is optimized for energy efficiency, reducing power consumption during operation. This can lead to cost savings on electricity and lower operational expenses over time.

5. **Compact and Space-Efficient Design**

The MHD095C series is designed to fit into tight spaces, making it ideal for applications where floor space is limited. Its compact form factor does not compromise performance.

6. **Wide Range of Mounting Options**

The motor supports multiple mounting configurations (e.g., flange, foot, or shaft-mounted), providing flexibility in system integration.

7. **Support for High-Speed Applications**

With a rated speed of up to 6,000 RPM (depending on the variant), this motor is well-suited for high-speed automation tasks, such as high-speed packaging, textile machinery, or printing presses.

8. **Good Thermal Management**

Rexroth servo motors are equipped with effective cooling systems to handle sustained high loads without overheating, ensuring consistent performance under heavy operational conditions.

9. **After-Sales Support and Availability of Spare Parts**

As a global industrial giant, Bosch Rexroth offers extensive after-sales support, including technical documentation, training, and readily available spare parts. This reduces maintenance downtime and ensures long-term operational reliability.

10. **Future-Proofing with Modularity**

The motor can be easily integrated into modern Industry 4.0 frameworks, supporting digitalization, remote monitoring, and predictive maintenance through Rexroth s software solutions.

---

#### **Cons**

1. **High Initial Cost**

Like most high-performance servo motors from premium brands, the Rexroth MHD095C comes with a significant upfront investment. This may be a barrier for small businesses or startups with limited budgets.

2. **Complex Installation and Tuning**

Due to its advanced features and integration with Rexroth s control systems, installation and tuning may require specialized knowledge. Users without experience in servo motor systems may need to hire trained technicians or invest in training.

3. **Dependence on Rexroth Ecosystem**

While the motor s compatibility with Rexroth s drives and controllers is an advantage, it can also be a limitation if the system requires integration with third-party components that are not fully supported. This may necessitate additional adapters or middleware.

4. **Limited Availability of Aftermarket Support**

Compared to more generic servo motors (e.g., from brands like Yaskawa or Siemens), finding third-party maintenance or replacement parts for Rexroth motors may be more difficult outside of authorized service centers.

5. **Potential Overkill for Low-Demand Applications**

For applications requiring only moderate performance (e.g., simple conveyor systems or low-speed positioning), the MHD095C may offer more capability than needed, leading to unnecessary cost without significant benefits.

6. **Learning Curve for Software Integration**

Rexroth s IndraDrive and IndraMotion software require familiarity with PLC programming and motion control logic. Users unfamiliar with these platforms may face a steep learning curve when setting up the system.

7. **Maintenance Costs**

While the motor itself is durable, specialized maintenance (e.g., encoder calibration, drive firmware updates) may incur additional costs if performed by external experts.

8. **Potential for Higher Operational Noise**

High-performance servo motors can generate more noise during operation compared to simpler stepper motors or lower-end servo alternatives. This may be a consideration in noise-sensitive environments.

9. **Longer Lead Times for Custom Configurations**

Depending on the specific requirements (e.g., custom cabling, special mounting), lead times for customized versions of the motor may be longer than off-the-shelf alternatives.

10. **Compatibility Issues with Non-Rexroth Systems**

If the motor must interface with non-Rexroth drives or controllers (e.g., from Allen-Bradley, Siemens, or Mitsubishi), additional communication protocols or gateways may be required, adding complexity to the setup.

---

### **Conclusion**

The **Rexroth MHD095C-058-PG1-AN servo motor** is an excellent choice for applications requiring **high precision, reliability, and integration with Rexroth s control ecosystem**. Its strengths lie in its **performance, durability, energy efficiency, and support for high-speed automation**, making it ideal for industries such as **CNC machining, robotics, packaging, and textile manufacturing**.

However, the **high upfront cost, complexity of installation, and dependence on Rexroth s ecosystem** may pose challenges for smaller operations or those with limited technical expertise. Additionally, if the application does not demand its full capabilities, the investment may not be justified.

For users already working within **Bosch Rexroth s automation framework** or those prioritizing **long-term reliability and performance**, this motor is a strong recommendation. For budget-conscious or simpler applications, alternatives such as **Yaskawa Sigma-7, Siemens 1FK7, or Panasonic MNS series** may offer a more balanced cost-performance ratio.

---

### **Recommendation**

- **Buy the Rexroth MHD095C-058-PG1-AN if:**

- You are operating in an **industrial automation environment** where Rexroth s ecosystem (IndraDrive, IndraMotion) is already in use.

- Your application requires **high speed, precision, and torque** (e.g., CNC milling, robotic arms, high-speed packaging).

- You can justify the **higher initial cost** with long-term operational benefits (reduced downtime, energy savings, and scalability).

- You have access to **technical support or trained personnel** for installation and maintenance.

- **Consider alternatives if:**

- Your budget is constrained, and you can find a **similarly performing motor at a lower cost** (e.g., Yaskawa, Siemens, or Panasonic).

- Your system does not require Rexroth-specific integration, and third-party compatibility is a priority.

- The application demands **lower speeds or torque**, making a more affordable servo motor sufficient.

- In-house expertise in servo motor tuning is limited, and hiring external support would be costly.

For most **high-end industrial automation projects**, the Rexroth MHD095C remains a **premium but justified choice** due to its reliability and performance. However, a thorough cost-benefit analysis should be conducted to ensure it aligns with the specific requirements of the application.

Details:

part #: mhd095c058pg1 prices

  • $4651.24-$12000.00

specifications valvesplumbing:

  • brand: Rexroth
  • mpn: Mhd095c-058-pg1-an
  • part type: Servo Motor

returns valvesplumbing:

  • paid by: Buyer
  • method: Money back
  • time: 30 Days
  • policy: Returns Accepted

shipping valvesplumbing:

  • class: Standard
  • carrier: USPS
  • cost: $375.00
  • transit: 5-10 Days
  • service: USPS Ground Advantage
  • type: Fixed

general valvesplumbing:

  • condition: Seller refurbished
  • Hydraulics, Pneumatics, Pumps Plumbing > Valves Manifolds > Other Valves Manifolds

seller valvesplumbing:

  • rating: 100.0%
  • city: Niagara Falls, New York
  • # reviews: 1246

offer valvesplumbing:

  • sold: 0
  • options: Ship-to-home
  • started: March 4, 2026
  • availability: In Stock
  • quantity: 1

payments valvesplumbing:

  • other
  • credit card: Visa
  • wallet: Apple-pay
part type: servo motor,
category: business & industrial > hydraulics, pneumatics, pumps plumbing > valves manifolds, sku: 22820730592129771,
Rexroth MHD095C-058-PG1 Is Similar To:
valvesplumbing logo
5 offers $4651.24–$12000.00 USD
  • Seller refurbished. Offer #1 priced at $12000.00 + $155.47 shipping estimate = $12155.47* total. +$155.47 shipping
  • Neu: Sonstige (siehe Artikelbeschreibung). Offer #2 priced at $8140.54 + $115.15 shipping estimate = $8255.69* total. Jetzt kaufen BOSCH - REXROTH - INDRAMAT.+$115.15 shipping
  • Gebraucht. Offer #3 priced at $4651.24 + $103.52 shipping estimate = $4754.76* total. REXROTH INDRAMAT -AN R911290293 PERMANENT MAGNET MOTOR.+$103.52 shipping
  • Seller refurbished. Offer #4 priced at $7900.00 + $375.00 shipping estimate = $8275.00* total. +$375.00 shipping
  • Used. Offer #5 priced at $1850.00 + $135.00 shipping estimate = $1985.00* total. +$135.00 shipping

Copyright © valvesplumbing.com