ITT S252S Gas Boiler Solenoid Control Valve Npt 32N3FJ5 110/120V H2A 1-1/2

( Brand: Itt ), ( Manufacturer Part Number: S252S ), ( Part Type: Control Valve Boiler Solenoid ), ( Suitable Media: Gas, Gas Natural, Ng ), ( Unit Type: Unit ), ( Normally Open Normally Closed: Normally Open ), ( Valve Operation: Solenoid ), ( Country Of Origin: United States )

Review ITT Gas Boiler Solenoid Control Valve Inch Npt 110/120v H2a 1-1/2

The **ITT S252S 32N3FJ5 Gas Boiler Solenoid Control Valve** is a high-performance, precision-engineered component designed to regulate the flow of natural gas or propane within residential and light commercial heating systems. This robust valve operates under the control of a boiler s electronic ignition or thermostat, ensuring efficient and safe gas delivery to the burner assembly when demand is detected. Constructed with a durable **1-1/2" NPT (National Pipe Thread) connection**, it accommodates standard gas line piping, providing a secure and leak-resistant seal through its threaded design, which is compatible with both copper and steel piping systems. The valve is rated for **110/120V AC** operation, making it universally adaptable to standard household electrical systems, while its **H2A certification** confirms compliance with strict safety and performance standards, particularly in North American markets.

At its core, the **S252S 32N3FJ5** features a **normally closed (NC) solenoid mechanism**, meaning the valve remains sealed until an electrical signal activates it, preventing unintended gas flow and enhancing system safety. The solenoid coil is designed for reliable, low-power activation, ensuring minimal energy consumption while maintaining consistent performance over extended operational cycles. Its **32N3FJ5 designation** indicates a specific gas pressure rating and flow capacity, making it suitable for moderate to high-demand applications such as forced-air furnaces, boilers, or water heaters. The valve s internal components, including the stainless steel or brass body and sealed diaphragm, are engineered to withstand thermal cycling and pressure fluctuations, reducing the risk of corrosion or premature wear.

For installation and maintenance, the **ITT S252S 32N3FJ5** is engineered for ease of use, with a straightforward mounting process that allows for quick replacement or servicing. Its compact yet sturdy design ensures it fits seamlessly into tight spaces within HVAC setups, while the clear labeling and standardized electrical connections simplify wiring and troubleshooting. Whether integrated into a new installation or retrofitted into an existing system, this solenoid valve delivers dependable operation, helping to optimize boiler efficiency and ensure consistent heating performance. Its combination of **durability, safety, and compatibility** makes it an indispensable component for professionals and DIY enthusiasts alike, offering peace of mind with every activation cycle.

### **Pros and Cons of buying a ITT S252S 32N3FJ5 Gas Boiler Solenoid Control Valve (NPT, 110/120V, H2A, 1-1/2")**

1. **High-Quality Brand** ITT (now part of **Honeywell**) is a well-established manufacturer in industrial and HVAC components, known for reliability and durability.

2. **H2A Certification** The valve meets **H2A standards**, ensuring compatibility with natural gas and propane systems in North America, reducing safety risks.

3. **110/120V Electrical Compatibility** Works seamlessly with standard U.S. and Canadian electrical systems, avoiding the need for voltage converters.

4. **NPT Threading** National Pipe Thread (NPT) is a widely used standard in plumbing and HVAC, making installation easier with existing piping systems.

5. **1-1/2" Size** Suitable for medium to large gas boiler applications, providing adequate flow capacity for residential or light commercial use.

6. **Solenoid Operation** Allows for automated control, enabling remote or programmable activation (e.g., via thermostat or boiler control board).

7. **Durable Construction** Designed for long-term use in heating systems, with materials resistant to corrosion and wear.

8. **Widely Available** As a common component, replacement parts and technical support are readily accessible.

9. **Compatibility with Modern Boilers** Fits into newer boiler systems with electronic controls, improving efficiency and safety.

10. **Potential Cost Savings** If the valve fails in an older system, replacing it may improve efficiency and prevent costly repairs.

---

1. **Higher Upfront Cost** Compared to generic or aftermarket solenoid valves, this branded unit may be more expensive.

2. **Installation Complexity** Requires proper wiring, gas line connection, and possibly professional installation to ensure safety and functionality.

3. **Voltage Dependency** If the power supply fluctuates or fails, the valve may not operate correctly, potentially disrupting boiler function.

4. **Limited Customization** Unlike some modular systems, this valve has fixed specifications (size, voltage, gas type), limiting flexibility for non-standard setups.

5. **Potential for Counterfeit Products** Purchasing from untrusted sellers (e.g., unverified online marketplaces) may result in fake or low-quality replicas.

6. **Maintenance Requirements** Solenoid valves can accumulate debris or corrosion over time, requiring periodic inspection and cleaning.

7. **Compatibility Issues with Older Systems** If the boiler s control board is outdated, additional wiring or adapters may be needed.

8. **Replacement Parts Availability** While common, some specialized variants (e.g., different gas types or voltages) may have limited spare parts.

9. **Potential for Overkill** For very small or simple systems, a more basic valve might suffice, making this purchase unnecessary.

10. **Installation Risks** Incorrect installation (e.g., improper sealing, wrong wiring) can lead to gas leaks, reduced efficiency, or system failure.

---

The **ITT S252S 32N3FJ5 solenoid control valve** is a **reliable, high-performance component** for gas boilers, particularly in residential or light commercial applications where **safety, durability, and compatibility** with standard systems are priorities. Its **H2A certification, NPT threading, and solenoid operation** make it a strong choice for modern installations. However, the **higher cost, installation complexity, and dependency on electrical power** require careful consideration.

If you need a **long-term, efficient solution** for a **medium-sized gas boiler** and can ensure proper installation, this valve is a **solid recommendation**. For **budget-conscious buyers** or **very small systems**, a generic alternative might suffice. Always verify the **seller s authenticity** and **system compatibility** before purchasing.

- **Buy from a reputable supplier** (e.g., authorized distributors, HVAC specialty stores) to avoid counterfeit products.

- **Ensure your boiler s control system supports solenoid valves** (check wiring and voltage requirements).

- **Consider professional installation** if unsure about handling gas lines and electrical connections.

- **Compare with alternatives** (e.g., other ITT/Honeywell models or branded equivalents) if cost is a major factor.

- **Maintain the valve regularly** to prevent corrosion and ensure optimal performance.

For most **standard gas boiler applications**, this valve is a **highly recommended choice** due to its **reliability and industry standards**.

Details:

ITT Gas Boiler Solenoid Control Valve 1 NPT 110/120v S252S 32N3FJ5 H2A 1-1/2 PO. Unless shown on photos keys/accessories are not included. Please on the pictures for more details.

part #: s252s price

• $55.00

specifications valvesplumbing:

• brand: Itt
• mpn: S252s
• part type: Control Valve Boiler Solenoid
• suitable media: Gas, Gas Natural, Ng
• unit type: Unit
• normally open normally closed: Normally Open
• valve operation: Solenoid
• country of origin: United States

shipping valvesplumbing:

• type: Calculated
• cost: $18.15
• carrier: USPS, UPS
• service: USPS Ground Advantage, USPS Priority Mail Padded Flat Rate Envelope, UPS Next Day Air Saver, USPS Priority Mail
• class: Standard, Expedited, One-day
• transit: 3-6 Days

offer valvesplumbing:

• quantity: 1
• best offers: True
• options: Ship-to-home
• availability: In Stock
• sold: 0
• started: March 22, 2026

returns valvesplumbing:

• policy: Returns Accepted
• time: 30 Days
• method: Money back
• paid by: Buyer

general valvesplumbing:

• Hydraulics, Pneumatics, Pumps Plumbing > Valves Manifolds > Other Valves Manifolds
• condition: Used

payments valvesplumbing:

• other
• credit card: Mastercard
• wallet: Apple-pay

seller valvesplumbing:

• rating: 99.9%
• city: West Middlesex, Pennsylvania
• # reviews: 8597

Itt S252S Is Similar To:

• .36-316l-ra25max-cwp150 Itt Diaphragm Valve New No Box (23.4% similar) If another carrier such as ups or FedEx is required to ship due the size, then shipping costs may change. Itt pure-Flo...(April 27th, 2018)
• .5 a204 Itt Diaphragm Valve New No Box (26.2% similar) Itt pure-Flo. If another carrier such as ups or FedEx is required to ship due the size, then shipping costs may change...(July 1st, 2018)
• 04dz003a11gca Itt Alcon Solenoid Valve (33.1% similar) Don't miss out...(January 2nd, 2018)
• 131117413 Bell Gossett Itt Circuit Setter Plus Balance Valve 683328174136 (26.9% similar) Most other packages are priority. Occasionally we'll use FedEx ground or home delivery for extra large heavy packages. Will automatically provide you a return shipping label. Simply and we'll add that option to a listing. Its the quickest, easiest and most secure way to pay for your goods or ...(December 27th, 2018)
• 132164 Itt Bell Gossett Triple Duty Valve (29% similar) Ups does not deliver to PO. If you experience any difficulties, please feel free to via time. This is what makes biotech technology a strong and constantly growing company. About biotech technology. Biotech technology offers bulk order placement. Our standards technicians vendors inspect each ...(March 13th, 2018)
• Cwp200 Itt Iron Flanged Diaphragm Valve Usip (23.6% similar) Special instructions. Itt CWP200 iron flanges diaphragm valve USP manufactured by manufacturer part number: a previously used, fully functional product that may have some signs of cosmetic wear. Join our subscribe to news letter for exclusive discounts and special offers...(July 4th, 2018)
• F166834 Itt Pneumatic Valve Actuator Gv For Bore (30.5% similar) Happy buying. Believed to have a 14 bore and 13 stroke x 15 1 heads. One pneumatic gov valve actuator for fabric-valve, Itt composite body model F166834 GV14X13 2015 150 psi. There is some scoring on the rod...(July 21st, 2018)
• Fabri-valve Itt Wafer Gate Knife Valve Stainless Steel (27.7% similar) width : 15 in. Domestic shipping price is shown for us lower 48 states. Need it urgently. Next day second air services are available. After the return period has ended, you can no longer product. We choose the carrier. We get hundreds of items in daily, if don't have it today check back tomorrow. ...(March 1st, 2018)
• Gfxo3xxr Itt Grinnell Valve Co Conoflow Diaphragm (30.3% similar) Cornflour GFXO3X XR XI-3. Itt grinned valve co...(April 7th, 2018)
• Gh40xtheaxxg Itt Grinnell Valve Co Inc Conoflow (32.3% similar) No means to test. All statements regarding products and their configurations are made to the best of our ability with assumption that buyer is knowledgeable proficient in use this type equipment. Comes as shown. Appears to be new and unused. Has some cosmetic wear...(January 14th, 2019)
• 15psi Hoffman Itt Specialty Model 55 2 Npt Float Thermostatic Trap (25.5% similar) Itt Hoffman specialty model 55 float and thermostatic steam trap 2 npt, 15 max pressure pig...(August 7th, 2016)